I’m not exactly certain as to how old my Chinese Elm bonsai is. I know it’s the oldest bonsai I have in my collection, but I am not the first owner so I can’t be sure its exact age. Lets just say it’s old and leave it at that. Old enough for me to have been afraid to repot it for the last few years. Today is the day where I must get over that fear and dive in head first.
It’s growth has been stunted the last year and a half, so I just know that the pot it getting root bound and the soil is spent. It’s time to sh*t or get off the pot, if you will. So, with that said, let’s dive in!
Here it is in its shabby state.
Try to ignore the wild growth on the left side, I’m trying to create some new branching so it’s gonna look unsightly for a while. Notice instead the general lack of foliage and the shabbiness of the soil. Gross!
Trees this old need to be repotted every three to four years. It’s been five (gulp). Younger trees need to be repotted more frequently, around one or two years.
The first thing you want to do is create a nice work space because you’ll be making a mess. I use a fold up plastic table because you can set it up anywhere that’s convenient and it’s easy to clean. Here’s a wider shot showing my work space.
Plenty of room to let the dirt fly and all my tools get in the way! Speaking of tools, it’s a good idea to invest in a few if you plan on creating bonsai. You should start off with a wire cutter, some shears and a few branch cutters to begin with. A straight branch cutter and a concave one would be a good start. Or you can do it the way I did several years ago when I was starting out. I went a bit nuts with this hobby at first and bought the master set. The Mr. Miyagi Set.
This is a great way to spend a butt load of money for tools that you may never use! However, I do so enjoy rolling out the mat when I begin to get to work styling! But back to our struggling Chinese Elm!
Due to the general smallishness and shallowness of your typical bonsai pot, you almost always have to use bonsai wire to hold it down into the pot. It’s made of aluminum usually so it doesn’t rust and is easy to work with.
The next step in repotting is to remove the wire to free the tree from the pot. Do this from the underside with your wire cutters.
Free at last! Once they’re clipped, bend them straight so they have an easy exit through the holes in the bottom of the pot. If it’s been some time since you’ve repotted, the whole plant should come up roots, dirt and all. A sure sign that you’re doing the right thing because this bad boy is root bound!
Yep, I definitely should’ve done this a long time ago! Oh well, ever forward. The next step is we want to remove all of the old spent soil without damaging too many of the tender roots. This can be tricky and I recommend that you never use your hands to do so. If you haven’t purchased the master tool set and don’t have a fancy schmancy root hook, you can use a chopstick just as easily.
Begin in one spot and carefully poke the dirt to loosen it. Take your time and be gentle in doing so. Slowly work your way around the roots and it should get easier as you go.
It’s okay if a few roots come off during the process. It happens. Sometimes the roots are already detached especially in root bound pots. We’re going to trim off some of the roots anyways so it’s not a huge loss. You just don’t want to remove more than a third of the roots during the whole process.
And all done! I trimmed off only a small amount because this root ball lost a lot during the soil removal. I gave it a gentle rinse with the hose to remove the remaining soil as well as to keep those sensitive roots moist! Now is not the time to take a break and go watch Game of Thrones! We must work quickly prepping the pot so we can re-plant as soon as possible.
Next we wire in the screens and place the new wire to secure our tree. The screens keep the soil from seeping out during watering, but allow the drainage to still be fast.
Next you place the support wire through the holes to accept your tree. I drilled two extra ones in this pot because this tree is heavy and has a definite lean to it.
Now we are ready to add some soil to the bottom of the pot. Bonsai soil is not the typical potting soil you buy at the nursery. It needs some extra loving to stay well drained and keep the tree healthy.
Typically, bonsai soil will have about 60% inorganic material and 40% organic. Depending on the species of course. Look up online the best soil mix for your species as there are too many to list here.
Bonsai need excellent air flow and superb drainage in order to be happy. Regular potting soil would retain too much water and the roots would rot. That’s why we use so much inorganic material, to provide good oxygen and drainage. You can go out and buy some really expensive akadama soil to mix in with your organic, but it’s a huge waste of money. Especially for larger trees. Akadama is simply tiny clay balls. If you want to save some money, you can replace it with cat litter! Not the perfumed kind or the clumping kind. The cheap stuff. You can even use floor sweep from an auto supply store and save even more money. That’s made from diatomaceous earth and has the same properties as akadama and kitty litter. Here’s a good place to look for brands in your area that are safe.
The only thing with all three of these options that I don’t like is that they begin to break down after a few years and can cause serious drainage trouble. Especially the clay from the kitty litter and the akadama. For younger bonsai that you intend on repotting every other year, this is a moot point so go for it! For older trees, you may want something that will hold up a bit longer and wont degrade.
Decomposed granite and pumice are great inorganic materials for this purpose! Whatever you use, be sure to sift out any dust or smaller particles to keep that drainage! I use a screen with 1/8″ openings to handle that task. You don’t want any silt to gum up the works!
For my Chinese Elm, I decided on using pumice.
Nothing beats fresh home made compost for the organic material! For my mix, I added a small amount of peat, a bit of sand and some fresh worm castings to give it a bit of a boost. You can also buy a soil mix from a local nursery because to make this batch of goodies at home may cost more than if it’s premixed. Plus, you may not have all of those supplies readily available. The organic material is going to help retain some moisture but mostly provide nutrients to those hungry roots. If all you have is potting soil, make sure at least that it doesn’t have any time-released fertilizer or Pearlite in it. You don’t want too many nutrients that will burn those sensitive roots nor do you want too much moisture retention. It’s always better to fertilize bonsai with a weaker liquid solution. With bonsai, you always have to water and fertilize more frequently, albeit with weaker solutions, due to the micro-environment you’re creating in such a relatively small pot. Standard potted plants have a bit more wiggle room because their pots are much larger in relation to the plant.
For Chinese Elms, the ratio should be around 70% inorganic to 30% organic. That’s just how they roll yo. So I took my standard 60/40 mix and added more pumice to it.
That should prove to be a perfect mix for this bonsai! Now that my wires are ready to accept, I sprinkle a small layer of this soil on the bottom of my pot and then carefully place the tree into position for the wiring. To reduce stress on the tree, make sure you have your soil all mixed and ready to go before you begin the whole process.
This is where things can get tricky. Getting the tree to be in a pleasing position without damaging the roots takes a little bit of practice. Getting the tree to stay in that position when you’re done takes even more. Just take your time and be gentle and you’ll get it! You can gently stuff some soil underneath as you go to help support the tree as well. Once you feel it’s secure, carefully tighten the wires and trim off any untidy parts.
I try to keep most of the wire buried under the soil. Sometimes that’s simply not an option. Do your best, but remember that a secure tree is much better than hidden wires. With bonsai, you’re in it for the long game so patience with unsightly aspects is par for course. Once your tree is properly secured, begin adding the soil.
Use a small scoop or a large spoon to get into hard to reach areas. It’s very important that there are no gaps between the soil and the roots. As you add the soil, you want to gently probe it in to these spaces with a chopstick.
Slow and steady wins the race! You don’t want it so tightly packed that it effects oxygen flow or drainage, you just want the soil to gently hug every nook and cranny around the roots. Keep doing this as you slowly build up the soil around the base of the tree.
And here we are! A fresh new start for our bonsai to grow up big (well, small) and strong. Once you’ve finished, it’s a good idea to gently mist the soil so all the loose bits fall into place. Don’t use the “jet” setting for this task. Slow and steady, remember?
Once you’ve got a good soak with the mist, you can increase to a gentle shower until the water is freely flowing out the bottom of the pot. make sure that as you do this, there is no pooling at all, the water should flow as quickly as it’s being added. If it doesn’t you have a drainage problem you have to deal with. Here we are all finished.
And look how happy my little pipe-smoking friend is!